- 介绍：我为必应打印耗材料盘设计了一个专用的干燥盒，干燥盒参数为：直径62.8mm，高度69.5mm，突出料盘两侧均为3mm。安装在料盘上之后，可以储存时使用，也可以放在AMS中使用（非常极限，但又刚刚好）。采用螺旋方式固定，结实不易遗撒。
- 特点：通气孔可以根据你的喜好直接在bambu studio中直接修改，包括孔间隙，透气孔的图案，比如蜂窝，三角形，六边形或是网格，默认的为60%填充，内六边型。（修改方法为：对象名为洞洞板后缀的文件，在对象-强度-稀疏填充，然后修改你喜欢的透气孔图案以及稀疏程度即可），PS：你也可以将盖子和主体调整为不同的填充图案，这样就可以分辨哪边是盖子。
- Tips：请务必打印完成后，将盖子和桶多旋转几遍，磨合掉棱角，这样安装时候才更顺畅。
如果你的料盘孔径和此参数类似，你也可以使用此文件。
- Introduction: I have designed a special drying box for the Bing print consumable tray, the parameters of the drying box are: diameter 62.8mm, height 69.5mm, protruding from both sides of the tray are 3mm, after mounting on the tray, it can be used in storage, or put in the AMS (very extreme, but just ok). It is secured by a spiral method, which is sturdy and not easy to be left behind.
- Features: Ventilation holes can be modified directly in bambu studio according to your preference, including hole gap, pattern of ventilation holes, such as honeycomb, triangular, hexagonal or mesh, the default is 60% filled, inner hexagonal. ----(The modification method is: the object name is the file of the hole board suffix, in the object - strength - sparse fill, and then modify your favourite hole pattern and sparse degree can be)---,PS: you can also adjust the cover and the body to different fill patterns, so you can distinguish which side is the cover.
- Tips: please make sure to rotate the lid and barrel a few more times after printing to grind off the edges for a smoother installation.
You can also use this file if your hopper aperture is similar to this parameter.
Master Kim
