Mark IV Male Heavy Tank WWI Britain 1/35 Scale

================================

I’ve included a square wooden beam in the file for you to print and attach to the back of this tank. However, I chose to make mine by bundling several small sticks together to form a rolled bundle on top.

📋 Recommended Print Settings (For Best Results) 

• Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly. 
• Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model. 
• Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping. 
• Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion. 

🔧 Assembly Diagram Notes 

• Blue Lines: Require super glue for assembly. I use Gorilla Super Glue. 
• Yellow Lines: These are moving parts. Do not apply glue here.