Stroller/Pram Disk Brakes w/ Calipers - Bugaboo

This is a set of disk brakes and Brembo calipers for the Bugaboo Kangaroo stroller/pram.

 

It's been designed so that the calipers hold in place while the disks spin with the wheels. The disks are held in place by the hub cap assembly and require the removal of the small cap on each wheel of the stroller (comes off very easily).

 

Doesn't need any hardware to assemble; however, you will need to melt the ends of the logo clip for it to hold securely on the hub cap. Or use glue.

 

Could be printed as a decorative model as well.

 

Please be kind as this is the first model I've made since I got in to 3D printing with my first printer, a P2S, about 4 weeks ago. The profile is for PLA, but you must print with PETG or similar if you intend to leave the stroller in your car, otherwise the heat will warp everything and throw out the alignment. 

Boost MeThis is my first design and upload, so if you're keen to see what else I can come up with - show me I should put the effort in by giving a boost (please!)