MTB Bike Wall Hanger (up to 660×47, Flat pedal)

Description

This is a minimalist wall-mounted hanger designed specifically for MTB bikes.
The bike is supported at three points: both wheels and one pedal, keeping it stable and close to the wall.

• Wheel supports: Two round wall-mounted holders that follow the curvature of the wheel, so the tire naturally sits in the cradle and cannot slide or move out. Each holder is fixed with two screws and supports road wheels up to 660×47.
• Pedal anchor: Dedicated support for flat pedals max. width 110mm, also secured with two screws, preventing the bike from rotating or swinging.
• Secure three-point mounting: The curved wheel cradles and pedal anchor work together to keep the bike aligned and stable.
• Clean, compact design: Simple geometry with no unnecessary bulk – suitable for garages, apartments, or bike rooms.

Mounting hardware used (tested):

• Fischer DuoPower 6×30 wall plugs
• T20 4×35 mm screws

Designed for easy printing and solid wall mounting.
A practical and secure wall hanger that safely stores your bike while keeping a clean, unobtrusive look.

Last 5 photos are courtesy of @user_3583480443.
These photos were provided by the user and are shared here with their permission. All credit for the photos goes to them. Thank you for allowing them to be used to showcase the model.