Launchable Sidewinder Model Rocket for 18mm Motors

Disclaimer

 

This project, including all 3D models, documentation, and associated information, is provided for informational and educational purposes only. It represents an experimental design and has not been certified, tested, or verified for safety, reliability, or compliance with any standards.

Building, modifying, or operating model rockets involves significant risks, including but not limited to property damage, personal injury, or death. This project is intended for experienced users only.

By using these files or any related information, you acknowledge and agree that you do so entirely at your own risk. The author makes no warranties, express or implied, and assumes no responsibility or liability for any damage, injury, loss, legal consequences, or other issues arising from the use, misuse, construction, modification, or operation of this design.

Users are solely responsible for ensuring that any use of this project complies with all applicable laws, regulations, and safety guidelines in their jurisdiction.

 

Launchable model rocket, based on the AIM-9 sidewinder AAM. 
Fits Estes 18mm rocket motors (A,B,C).

Launched with B6-4, looked like about 200-250ft. 

OpenRocket shows +600ft with a C6, but the stability margin goes down with the heavier motor. Looks like only about 60ft on an A8.
Used streamers instead of a parachute on maiden launch, came in a bit hot and broke a fin. Might be a good idea to use a chute on this one.

Due to the upper fins, it's a bit unstable, hence the 100% infill in the nose and nosecone connector. 

DO NOT CHANGE INFILL. 100% INFILL REQUIRED TO MAINTAIN CP/CG AND FLIGHT STABILITY

Boost Me