February 16, 2026
Description
Parametric hydration pack Bladder Hanger
Change the size of the hook to accommodate your hanging needs. Make sure to add a few mm extra so the fitment isn't so tight (unless you prefer it that way then go right ahead)
Default hook size is 20mm.
Fast thin print
Recommendations
15-20% infill
Gyroid
3 Walls
I printed in Elegoo PLA+
Should work with most brands of hydration packs eg. uswe, camelbak, osprey etc.
Specifically made to be used in combination with HamandChris' Printable Snap Lock Keyring
I used the small variant but either small or medium should work
Instructions:
Download and print the Snap Ring and the Hanger
Install Snapring where the tube connects to the bladder
Place the tube between the two posts
Hang the hanger
Hang the bladder on the hanger
Done!
Always looking for recommendations for improvements
License:
BY-NC-SA
gatekeep
