Bassreflex Tube / Port Tube 60-120mm diameter

Attention: Look out for the maximum print height on your printer!

Scale the model if necessary a few milimeters for your perfect print height!

This is a set of different diameter and lengths of bassreflex pipes / ports for your subwoofer installation casing

From 60 to 120mm in diameter ( 2,4 inch to 4,7 inch )

Length of the different models are depending of what makes sense.  A wide diameter of the pipe needs also length to work as expected.

Watch out for the height of the model, it might exceed your printers capabilites! 

The Endcap-Models are not necessary by all means, but you can install it if you can reach the position without problems. The tube itself works without cap also, but the endcap may compliment airflow better.

I recommend finishing the pipes with a sanding pad / sanding paper for a smoother finish. I also paint mine with black matte when it is finished. 

If you need special measurements please let me know and i can draw them!

If you have any questions, feel free to contact me!

thank you for a like, share or boost :)