Print-in-Place Honeycomb Hinged Box

Print-in-Place Honeycomb Hinged Storage Box

This is a compact print-in-place hinged storage box featuring a debossed honeycomb top surface that adds both visual appeal and functional grip.

The hinge and clasp are fully integrated into the print. No assembly, supports, or additional hardware required.

The honeycomb pattern provides a clean, satisfying surface finish while maintaining excellent structural strength. The integrated clasp offers a gentle mechanical hold to keep the lid securely closed while still allowing smooth, easy opening.

Ideal for storing

• Small parts
• Electronics components
• SD cards and USB drives
• Screws and hardware
• Desk items
• Coins
• Everyday carry items

Compact size: 85mm × 65mm

Print Notes

• Prints fully assembled (true print-in-place hinge)
• No supports required
• Works especially well on textured or effect plates for enhanced surface appearance
• After printing, gently open and close the lid several times to fully free the hinge

Important First Layer Recommendation

Due to the honeycomb surface geometry, slowing the initial layer improves adhesion and surface quality.

Recommended setting:

Initial layer speed: 15 mm/s

This ensures clean formation of the honeycomb pattern and reliable print results.

Design Features

• Fully print-in-place hinge mechanism
• Integrated clasp closure
• Debossed honeycomb top pattern
• Compact, efficient footprint
• Clean, minimal design
• Optimized for reliable printing and durability

This model was designed from scratch in Fusion 360 with a focus on reliability, print quality, and long-term functional performance.

 

Boost Me💚 Support My Work:
If you like this model, click the Boost Me button or use my Amazon links when grabbing tools. It helps me keep making and sharing designs for the community — thank you!

 

Safety/Disclaimer: 

• Provided “as is.” Not certified. No warranties. Use at your own risk.
• Verify fit/clearance before use. Do not use if it interferes with normal operation, safety features, or emergency shutoff.
• Inspect regularly; stop using if loose, cracked, warped, or damaged.
• 3D-printed plastics can deform with heat, UV, chemicals, or load—avoid high heat and harsh cleaners unless you know the material is suitable.
• If this model holds/uses a sharp edge or blade: handle with care, keep out of reach of children, and use only as intended.
• Keep out of reach of small children; small parts can be a choking hazard. Adult supervision recommended where applicable.
• Not affiliated with or endorsed by any brand mentioned; all trademarks belong to their respective owners.