Better Hollow Scraper

Recommended Settings

• Layer Height: 0.2mm (balanced strength and surface finish)
• Walls/Perimeters: 4
• Top/Bottom Layers: 5
• Infill: 40% (Gyroid or Grid recommended)
• Supports: Not required
• Brim: Not required

Material Recommendations

• PLA – Easy to print and perfect for general-purpose scraping
• PETG – More durable and higher heat resistance

Print Orientation

Print flat on the large base surface (as modeled). This ensures:

• Maximum strength along the handle
• Clean scraping edge
• No supports required

Strength Notes

The hollow design keeps the scraper lightweight while maintaining rigidity. The increased wall count and infill ensure the handle remains strong under pressure.

 

Boost MeOn my way to saving for a new printer, if you liked it - give it a boost :)