Geetech TPU Profile

Since I used Geetech TPU none of the existing profiles worked for, either I had too much stringing or blobs or something else.

So, I came up wih fine-tuning this lousy filament for ideal quality. 
First I tried with different temperatures but there was almost no difference and as Geetech recommends a lower volumetric speed, 
I lowered the various speed parameter more and more.
The result I got now was much better but it is definitley very slow. If that is the price for good quality, I'm fine and patient ;-)

Make sure you dry it well and then do the k-factor and flow rate calibration, I also reduced the temperature to 220°C and raised bed temperature to 50°C