Tatsumaki Hueforge

Please let me know if there is anything I can do to improve this one.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 93.56x162.6mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

    #000000 PLA Sunlu Meta Black  Transmission Distance: 1
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #ffffff PLA Sunlu Meta White  Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #23 (1.92mm) swap to Blue Gray
    At layer #27 (2.24mm) swap to BambuLab Green
    At layer #36 (2.96mm) swap to White

Border Only Colors from here until the end.
    At layer #44 (3.6mm) swap to Black for the rest.