Led Kit 001 HydroSquare Rain Planter

HydroSquare: The LED Rain Planter & Table Lamp 🌿✨

Experience the perfect blend of nature and technology with HydroSquare. This 25x25cm square planter is not just a home for your plants; it is a piece of functional art featuring a unique "Rain Irrigation" system. Simply pour water into the top reservoir and watch as it gently drips down, simulating a natural rainfall that creates a mesmerizing, sparkling effect under the light.

This model is meticulously designed to house the Bambu Lab LED Kit 001 (Maker’s Supply). The integrated LED mount provides the ideal light spectrum for your herbs or succulents while acting as a stunning ambient lamp for your desk, bookshelf, or kitchen. The link to purchase the LED kit can be found in the BOM (Bill of Materials) section at the top of this page.

🛠️ Assembly Instructions: Cipriani 3Design Table Lamp

Follow these three simple steps to bring your creation to life:

Required Components:

• A - 3D Printed Lamp Body
• B - LED Kit 001 (Bambu Lab MakerSupply)
• C - Perimeter Cavity Cover

Step 1: Installing the Light Heart 💡 Take the LED disc (Kit 001). Inside the top section of the lamp, you will find a custom-sized circular housing.

• Insert the LED disc into the central hole.
• Ensure it is firmly seated and level with the internal surface.

Step 2: Cable Management 🔌 The cable is already connected to the LED from the factory. To maintain a clean, professional look, we need to hide it.

• Slide the cable along the perimeter cavity (the track carved into the inner edge).
• Make sure the cable is pulled taut and sits flush within the groove along the entire length of the lamp arm.

Step 3: Closing and Finishing 🔒 To protect the cable and complete the design, use the dedicated cover.

• Take the cavity cover (Component C).
• Press it into the track over the cable.
• Press firmly along the entire perimeter until the surface is smooth and uniform.

Printing Tips 🖨️

• Material: Optimized for PLA or Silk PLA.

• SLICER: Any change to the set print profile will compromise the printing of one or more components

• Durability: I recommend 3-4 wall loops to ensure the reservoir is completely watertight.

Trusted Quality ⭐⭐⭐⭐⭐ Trusted by the MakerWorld community 99% ★★★★★ ratings. I design my models with printability and durability as top priorities, ensuring a premium experience.

Love this design? Explore my full collection of premium 3D models and stay inspired by clicking here: https://makerworld.com/it/@cipriani3design/upload.

Follow me on Instagram to stay one step ahead of other Makers and see my latest creations: https://www.instagram.com/cipriani_3design/.