Designer Lamp RA05

This lamp is inspired by a true Scandinavian classic. At the same time, it is an original design of its own, carefully optimized for 3D printing.

It is not a print‑and‑go design, which makes it a refreshing contrast to the many one‑piece lampshades available for download.

Printability

The individual parts are generally easy to print, but some of them are quite large, which increases the overall difficulty.

There are two versions of the lampshade available: a 300 mm original version and a 250 mm version for smaller printers.
 

Compatibility

The lamp was designed for a common European E14 smooth-sleeve socket with an M10x1 strain relief.
Link
However, I fully trust the Maker community — if adjustments are needed, they can certainly be made.

 

Screws & Accessories
 

I have linked the screws I used. Additionally, I included a second set of connector rods so that the Bambu MakerSupply 2×8 mm screws should work as well. Overall 6 small screws are needed. 

Personal Note

This is my first more complex model, so I would really appreciate a like, adding it to a collection, or even a boost!

Enjoy printing!