Home Assistant Yellow 10in Rack Mount

I wanted a mount for my Home Assistant Yellow that didn't retain the original case. But that retained the ability to see the indicator LEDs from the front.

NOTES:

• I can't upload any custom filament settings. But basically use the filament settings for clear PETG from the Bambu Wiki.
• The second plate with the clear optics on it should be printed using a smooth plate, not a textured plate.
• the clear optics are a “really tight” press fit. Might need some force (or light sanding. Just don't send the surfacing touching the LEDs).

Additional Parts List:

• 4 x M2.5*4 bolts
• 1 x keystone connector
• 1 x short ethernet cable