Hueforge Cat

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA+ JAMGHE Black Transmission Distance: 0.3
    PLA BambuLab Matte Dark Red Transmission Distance: 1.5
    PLA BambuLab Matte Sakura Pink Transmission Distance: 3
    PLA BambuLab Matte Ivory White Transmission Distance: 10

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Dark Red
    At layer #8 (0.72mm) swap to Sakura Pink
    At layer #13 (1.12mm) swap to Ivory White for the rest.