Dummy 13 Hang Glider (NO AMS)

This is the perfect hang glider for Dummy 13.
The strings can also be 3D printed, and they are durable and won’t break. Assembly is very easy.

Please follow the tutorial below carefully to learn how to connect the strings

ㅡㅡㅡㅡㅡ

First, insert the string as shown below. (The hang glider handle does not have a front or back.)

Make sure the rear string is not perfectly horizontal.

insert the knot deeply into the handle section. Then twist the upper part downward and wrap it around tightly. (If you twist it down overlapping itself, it won’t look good.)

Once the upper part is finished, pull the string tight when wrapping the lower part and twist it again. Then cut off the remaining length with scissors.

(Be careful not to pull it too tight, or the hang glider wing may bend too much.)

You can tie the knot like this. It’s very easy.

If you want to finish the knot at that point, simply cut off the remaining part with scissors.

For the back side, do it like this. Position the string at the same height as the front handle and tie the knot there. (Use the same knot method as the upper part.)

Finally, if you’d like to display it, print out a stand and attach it. Then hook the rear string onto Dummy 13’s ankle.

Now sit back and enjoy your Buzz Lightyear–style Dummy 13! 🚀


To Infinity and Beyond!