Rice Cooker Strainer (customisable)

Rice Cooker Strainer designed for Reishunger 1.2 L bowl but customisable for similar bowls.

 

The strainer clips onto the bowl so it stays in place and doesn't need to be held in place.

 

How to customise

1) Click the green “Customise” button below the print profiles. Adjust the parameters:

bowl diameter	The outside diameter of the rice bowl.  Adjust if your bowl's diameter is not 210mm
material thickness	How thick is the material at the edge of the bowl?  This can be modified so the strainer lip fits well over the edge. Default: 2mm

2) Download the 3MF file

3) Follow the  guide to adjust the print settings in BambuStudio (see attached print-instructions.pdf file below)

 

Boost MeEvery boost is appreciated. Thank you for the support!

Let me know if you need help. Happy printing!


Changelog:
 

2026-02-22	v8	Initial Upload
2026-02-25	v9	Updated parametric source file: Some values that were previously hardcoded now scale with the diameter The mesh area has been simplified slightly to allow it to scale with the diameter
2026-06-03	v10	Updated parametric source file, minor fixes