Yes/No Slider

Boost Me3D printing is my new hobby, and hopefully something that will keep working on it. Help encourage me to upload more creations.

Require Glue! Magnets (2x6mm) x3 optional.

 

UPDATE: A mini version is available here

 

This is a quick model I've done in freeCad for our games night the next day. We needed a quick way to let the player show the group what their choice is base on the question. And something big enough that everyone can see from the end of the table. So this is as big as a phone.

 

The magnetic mechanism is added to give that satisfying snap but it's not really required. Without them the cover disc just need to be manually held down.

 

Be careful when applying glue on the top piece, so that there are no spill that might end up sticking the cover disc. Use a toothpick to spread the glue. The other parts that need to be glue down are the red and green disc that sit in the slots.

 

 

 

Magnets… Make sure to double check the polarity. The magnets need to be push, you will get some resistance but the magnet will fit, into the slot and there are no easy way to take them out once installed.

 

Final assembly looks like this…