耗材色卡+一体成型翻盖磁吸收纳盒 Color card and Magnetic suction Box

很快的大色卡的版本迎来的第三次改变，我发现可能有些朋友不太喜欢盖子分开的设计，所以我稍微花了些时间给收纳盒做了升级，现在可以一体打印下来之后，再在对应的位置安装4颗3mm x 3mm的磁铁，你就可以得到一个完美的一体式收纳盒了！

The third change to the soon to be large colour card version came when I realised that some of you might not like the lid being separate, so I spent a little bit of time upgrading the organiser so that it can now be printed off in one piece before installing 4 x 3mm x 3mm magnets in the corresponding positions, and you've got the perfect one-piece organiser!

需要注意的是，我在打印配置里设置了两种安装磁铁的方式，一种是通过暂停来内嵌磁铁，一种是有孔位，打印完再安装，您可以根据自己的需求来打印；如果你要通过暂停来内嵌磁铁，那么我在BambuStudio上已经设置好暂停层数，但我还是建议您打印前再检查一遍。

Note that I have set up two ways to install the magnet in the print configuration, one is to inline the magnet by pausing, and the other is to have holes and install it after printing, so you can print according to your needs; if you are going to inline the magnet by pausing, then I've already set up the number of pause layers on BambuStudio, but I'd recommend that you check it again before printing.

如果你没有标签机，那么可以来我的主页打印我的色卡mini，以及更多有趣的模型，谢谢！

If you don't have a labeller, then come to my homepage to print my colour card mini, and more interesting models, thanks!