February 24, 2026
Description
This holder is available in two different versions.
Both versions hold 12 screwdrivers distributed on two different heights for easy access. The hole diameter on the upper holes is 15mm to allow screwdrivers with additional hex (e.g. the Bosch Professional screwdrivers) to sit flush on the surface.
The diameter of the lower holes is 8.5mm. The distance between each hole center is 40mm.
The models are optimized for using as little filament as possible and print without support when orientated as shown below.
Additional hardware needed:
License:
Standard Digital File License
MP Design
