February 25, 2026
Description
The most powerful rocket ever built! SpaceX Starship Superheavy.
These rocket models are designed to be as minimalistic as possible without compromising on their most iconic designs. Unlike other models these are also small enough to fit on any desk or shelf. The hollow exhaust can be illuminated with an LED-Tealight hidden in the smoke plume.
Most parts can be stacked onto each other. To fixate everything you'll just need to use some glue on the bottom and the top (see assembly instructions for this).
Superheavy is my third release optimized for Makerworld with other rockets coming in the near future.
If you feel that this model looks familiar, you might be right. This model was sold on Etsy a few years back by ANdruck which I was a part of. We have decided to rest our printing business for the foreseeable future due to emerging offspring.
Please message me directly if you plan on selling these via a commercial license as these rocket models are not covered by my Patreon and Makerworld licenses.
Property | Value |
| Height | 37 cm (fully assembled) |
| Notes | Rocket can stand alone without smoke and exhaust. |
(Values are based on the test print shown in the images)
Print Time
Parameter | Value |
| Estimated Print Time | 4 h 00 min |
4 plates total |
Material Used
Parameter | Value |
| Filament Consumption | 77 g |
| Material Type | PLA |
For best effect I highly recommend transparent PLA for the exhaust plume. However the walls are thin enough that an LED- light will shine even through normal PLA.
Printing Parameters
Parameter | Value |
| Printer | P2S w/ AMS 2 Pro |
| Layer Height | 0.20 mm |
| Nozzle | 0.4 mm |
| Infill | 10% (where necessary) |
| Supports | No |
If you enjoy this model, please consider supporting my work by leaving a like, rating the model, or sharing your make photos.
Thank you and happy printing!
License:
Standard Digital File License
AdrianS
