Honda Ridgeline Trunk Divider (2017-2025)

The original model of this did not fit on the P1P. It was slightly too tall. I edited it so that it would fit on the P1P bed and I also added some ‘bolts’ that somehow snapped into place really well. Saved me a trip to the hardware store. The actual Model uses ¼ - 20 nuts (x6 per divider)

¼ - 20 x ¾" long (Low head socket cap screw x6 per divider).

I only had to shave an inch off the top and angle it just right.If you have a larger printer, you can print the full thing linked in the remix credits. 

DO NOT PRINT AT HIGH SPEEDS. PRINT W/ SUPPORTS AT YOUR OWN DISCRETION.

It's kind of tall and unstable if you print at anything over 100%.