Customizable Gridfinity Aerosol & Cylinder Holder

This is the fully parametric, fully customizable version of my original Gridfinity Bin Aerosol Can Holder.

Instead of downloading pre-made sizes, you can now generate the exact bin you need directly in your browser using MakerWorld's Parametric Model Maker. Just click the "Customize" button!

✨ Key Features:

• Fully Custom Dimensions: Adjust the Gridfinity base size (up to 6x6 for 256x256mm Bambu plates) and the overall height of the bin.
• Any Cylinder Size: Need to hold a tiny glue stick or a massive 100mm wide jar? Just adjust the Hole Diameter slider.
• Magnet & Screw Ready: Features standard 6x2mm magnet holes and M3 screw holes on the bottom. You can apply them to all grid units or just the outer corners.

💡 Quick Customization Tip:

When setting the Hole Depth, make sure you don't drill all the way through the bottom!

Formula for a solid bottom: Multiply your Grid_Z by 7, and subtract 7mm. (Example: If Grid_Z is 6, total height is 42mm. Set Hole Depth to 35mm to leave a strong 7mm thick base).

🖨️ Print Settings:

• Material: PLA / PETG / ABS
• 2 walls

• Infill: 10% (Gyroid or Grid)