Pokemon Gen 1

Filaments Used:
 PLA BambuLab Basic Black  
  PLA BambuLab Basic Orange  
 PLA BambuLab Basic BambuLab Green  
 PLA BambuLab Matte Ice Blue  
 PLA BambuLab Basic Yellow  
 PLA BambuLab Basic Jade White 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Orange
    At layer #15 (1.28mm) swap to BambuLab Green
    At layer #19 (1.6mm) swap to Ice Blue
    At layer #28 (2.32mm) swap to Yellow
    At layer #33 (2.72mm) swap to White for the rest.

 

The Model is 120x200mm in size

You need a different size:

Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged.

 

You can find the matching Hueforge frame here.

https://makerworld.com/en/models/2307079-picture-frame-120x200mm#profileId-2518456

 

The Model is 200x400mm in size 2parts

Simply attach it with some PLA glue, and you're done. 

You can find the matching Hueforge frame here.

https://makerworld.com/en/models/2276100-picture-frame-400x200mm#profileId-2499464

 

Update:  17.05.2026 a new print profile for 200x400

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 4.48mm and the Actual Thickness is 3.12mm

 

Boost MeDo you like my model?
Then I would be incredibly grateful for your support in the form of a free Boost Token. And don't forget to follow me! Thank you so much! :)

Gefällt dir mein Modell?
Dann würde ich mich riesig über deine Unterstützung in Form eines kostenlosen Boost-Tokens freuen. Und vergiss nicht, mir zu folgen! Vielen Dank! :)