Perfect Aftermath insert

A full board game insert for Aftermath, which holds every mini separately, and the top closes nicely.

What I've modified from the original model on Thingiverse:

• added a card holder, as the box still had an empty corner for it
• remodelled one of the boxes (top token/card holder) so it can separate pieces better
• arranged every object to 3 build plates and adjusted the default settings to save time and filament

Storage can be seen in the picture, but here's the step by step guide:

1. remove all the pieces from the box and throw out (recycle) the cardboard insert
2. place the 7 boxes to the bottom right corner on their sides on top of each other
3. place the card holder to the top right corner, and populate the 5 different big card types (except the action cards)
4. place the big bottom insert to the bottom left corner and populate it with middle-sized minis (largest one is for Redeye Wyrd)
5. place the small 6-pack on the top left corner and populate it with 4 small short minis
6. place the tall 2-bay mini holder to the remaining space, and populate it with the 2 tall minis (Grumple & Rustlord)
7. place the single box on top of the six-pack at the top left, and put the cat inside
8. place the short top insert on top of the mini holder, and populate it with tokens and the remaing cards:
   1. action cards go to the largest opening
   2. next to it goes the 3 different small cards
   3. in the middle goes the vehicle standees
   4. under that the scavenger tokens
   5. to left battery and aim tokens
   6. under that roaches and hornets
   7. to the right fire and objective tokens
   8. to the right 2 dice
   9. to the right wound / toxic wound tokens
   10. above them every other token

I've left all the objects and cutouts in the model, so feel free to modify them as needed for your model.