Fan Mounts with Integrated Filter - Air Filtration

Our fan filter housing is perfect for those who need to easily add filtration to any enclosure. Our brackets make it very easy to mount the fans and attach them to the enclosure. Just snap on the brackets and screw the assembly to the inside of the enclosure.

 

The housing seats flush against the inside wall of your cabinet, forcing all intake air through the foam filter media.

 

Our new fan filter housing combines:

• 80mm & 120mm fan mounts
• Integrated foam filter holder
• Locking bracket system
• Single screw retention design

The filter housings are available in:

• 1/2" Thick (Only recommended for fans 24v+)
• 3/16 - 3/8" Thick

Recommend Filter Media:

• 3/16" Thick Open Cell Foam (Coarse, 30 DPI - Most Common)

 

The opening on the housing makes it easy to clean or replace filter media after installation.

 

Note: If you're using a standard 12v fan, please avoid using the large filter housing. This is to prevent any static pressure loss. Stronger fans can use the larger filters.

Boost MeYour boosts are a huge motivation to continue to create more models for this awesome community!