Boost MeLiked the print? Please consider giving me a boost!
I'm a novice 3D designer and a boost means a whole lot and encourages me to keep on making! Appreciate the consideration!
This is a functional, 8-inch wide stand designed to hold larger frames (10 x 12 up to 16 x 20) without tipping or bowing.
The design is minimal with rounded edges so it doesn't distract from the photo. I’ve included internal arches to give it enough structural integrity to handle heavier glass frames while keeping the overall profile slim. The viewing angle will vary by frame width, but it'll be somewhere between 15-18 degrees.
Print Specs:
- Size: ~8" wide, slightly under 8" tall.
- Material: Standard PLA works fine.
- Supports: Minimal. Just support the arches to keep the structural geometry clean.
- Color: Choose a filament that matches your frame. Matte finishes tend to look best for display pieces.
Technical Breakdown
- Width: 8" (Provides lateral stability for larger frames).
- Angle: The stand is pitched at 15 degrees, actual angle varies by frame width and how it seats.
- Reinforcement: Structural arches for rigidity.
- Finish: Filleted/rounded edges for a cleaner look.
anderoo
