Official DabTray - Banger Bath

Boost MeHelp a brother out! Your boosts make the difference. Let's put one of these at every great sesh!

This is an adaptation of Officialdabtray's original design Published on Thingiverse here - https://www.thingiverse.com/thing:6955877

 

External filament does not matter, however the internals should be PETG or another solvent resistant material. 

 

INSTRUCTIONS ARE WORK IN PROGRESS!!!!!!!!!
Wanted to give access to files while still working on detailed assembly instructions!

Official DabTray Products are now Open Source!
Download, make, remix, sell, I don't care! Just please credit me and send people to my Instagram! @OfficialDabTray

Assembly Instructions below!!

The ODT Banger Bath:

The Banger Bath is the ultimate tool for cleaning your banger. It uses a pump to actively flow solvents through your banger cleaning it toughly and efficiently.

Below is all the info needed to print and build the Banger Bath.

Assembly Instructions:

1. First print the parts obviously.
2. Prep and drill the container.
   • You need to mark a point to drill the tiny hole for the pump wire. Take a sharpie and mark a point
3. Sand the bond surface
4. Cut and position the pump
5. Seal the wire hole
6. Solder the switch
7. Bonding the base

Other Info:

• If you are having leaking issues: Attempt to reseal from inside of container. 
• Care info: Empty Weekly & Rinse with Fresh Isopropyl. 

Amazon Links (Not the same as I used but all this will work):

• Short Plastic Container 38oz: https://www.amazon.com/dp/B009T7Z0UK?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_8&th=1
• Tall Plastic Container 61oz: https://www.amazon.com/dp/B008BKN5Q2?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1
• Pump 110V (as pictured) : https://www.amazon.com/dp/B0B6PQG9HV?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3
• Pump USB (Preferred): https://www.amazon.ca/dp/B08JYW9VVB?ref=ppx_yo2ov_dt_b_fed_asin_title 
• Switch: https://www.amazon.com/dp/B01N2U8PK0?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2
• Sealant: 3M DP420 (best thing you'll be able to get off the shelf) (any solvent resistant epoxy will do)