Modular Sheikah Tower from Zelda BotW

This is a modular version of a Sheikah Tower from Zelda Breath of the Wild and Tears of the Kingdom. The details have been simplified a bit to make it easier to print.

This is not a beginner print, there are lots of overhangs that require good cooling and small first layers that require good bed adhesion. For BambuLabs printers this print will be a breeze

You can print an infinite number of columns and perches and make this as tall as you want, nearly everything is separated so you can print the different parts in different colored filaments and have very little painting to do.

Mine is scaled it to be used as a desk lamp/ornament

This was modeled in Fusion360, the F3D file is included but fair warning I am not that good at it so it may be hard to follow.

I ran a WS2812B LED strip through the middle of mine and animated the lighting using a Raspberry Pi Pico and the NeoPixels library, You are welcome to do the same and I've included some extra parts I used to do this.

Note:

Teardrop.stl / TeardropEyes.stl are tricky to print on their own, I've included a combined top piece (ArmsCombined.stl) for ease of printing, I was able to print this with minimal sagging and just sand the bottom, But I would recommend some supports for this piece

All of my projects are 100% Free. However if you'd like to support me, feel free to buy me a coffee

Buy Me A Coffee