Panda Den Poop Chute for P1S, P2S, and X1C

This is a complete redesign of the Panda Den Poop Chute from BQ. This Poop Chute was created from scratch. While it is technically not a remix, the original from BQ was used as inspiration. I tried to keep the design as close as possible to this original, while solving all the issues the original has (primary issue: it sinks in the poop hole with just normal use).

 

Changes:

1. The base is made wider, so it fits over the hole instead of sinking into it, like the original.
2. The chute was made a few mm thicker to cover the back of the hole.
3. The “feet” that hold the screws were re-shaped so that they now print without supports.
4. The screw holes were widened, and a chamfer was added, so that you can now actually screw in the magnets with the screws that came with the Panda Den.
5. The top was reshaped as to not obstruct a spool on the back of the printer (P1S).

This object still needs supports turned on.

 

Note that my print in the photos is from a slightly earlier version that I made a few modifications to. I will print the current design as soon as I can, and replace the photos at that time.

 

Boost MeIf you appreciate this design, please boost it. Boosts help me to keep my designs free for everyone.

Alternately, please consider putting a few bucks in my tip jar. 

Boosts and tips are never expected, but always appreciated.