Flynn Rider Wanted Poster Hueforge

Project: Flynn Wanted.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141.95x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ee465c PLA Sunlu Matte Red  Transmission Distance: 3
    #856fdc PLA Sunlu Purple  Transmission Distance: 6
    #a6896c PLA Overture Matte Light Brown  Transmission Distance: 0.6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Red
    At layer #15 (1.28mm) swap to Purple
    At layer #17 (1.44mm) swap to Light Brown for the rest.