Wall & Ceiling Anchor Hook +40KG Resistant

🔩 Heavy Duty Wall & Ceiling Anchor Hook — Tested at +40KG

This 3D-printed anchor hook has been personally tested with 40 kg of load applied with direct pull force — no failure, no flex. The key to its strength is the optimized print profile: 15 perimeters, 100% infill. Supports are easy to remove, they've been specifically designed for clean breakaway.

✅ What can you use it for?

• 🧺 Clothesline / laundry rope anchor
• 🪴 Heavy plant hangers & flower pots
• 🧥 Coat rack / wall hanger
• 🐕 Dog leash anchor point
• 🖼️ Heavy decorations & frames
• 💪 Resistance band training anchor (use with caution)

🖨️ Print Settings (IMPORTANT — follow for best results)

• Layer height: 0.28 mm
• Walls / Perimeters: 15
• Infill: 100%
• Recommended material: PETG or ABS (for max strength) / PLA (indoor, light use)
• Supports: Yes — optimized for easy removal

🔧 Hardware needed

You will need 2–4 screws + wall anchors (plugs) appropriate for your wall type. The base plate has standard mounting holes.

Spanish / Español: Gancho de anclaje para pared o techo muy resistente. Probado con 40 kg de carga. Imprime siguiendo el perfil de impresión incluido para máxima resistencia. Se puede usar para tendederos, macetas pesadas, perchas, correas de perro, bandas elásticas para entrenamiento y decoraciones pesadas.

📸 Share your make! Upload a photo of your printed hook — I'd love to see it in action! Leave a ⭐ rating if it was useful.