Filament Swatch with test, text, transparency

I created Remix by removing the interlocking edges to make it easier for me to keep them.

I added editable text because I don't need a labeler. And by the way, this is another font and text test :)

The bridges are set to 15mm/s and the bridge flow is 0.8.

Ironing is also arranged for test purpose only on text and edge.

You can only print the CLEAR version from your phone! The editable version of the text already has text entered, which you'll need to edit in the slicer.

Check out the swatch container for 40 pcs!

Here is a list of all the tests included in this part:

• Overall dimensions
• Small holes (1mm, 2mm, 3mm, 4mm)
• Small Posts (1mm, 2mm, 3mm)
• Smooth surfaces / slopes
• Sharp inside corners
• Sharp outside corners
• Stringing
• Bridging (20mm, 15mm, 10mm, 5mm)
• Transparency (0.1mm, 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm, 1.5mm, 2mm)
• Overhangs (25°, 35°, 45°, 60°)
• Thin gaps (0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm, 1.5mm)
• Thin walls (0.5mm, 1mm, 1.5mm, 2mm, 2.5mm)
• Ironing on edges and text

If the text is spreading left and right, set the text object coordinate to X= - 20.0mm