模拟城镇-街边酒吧+花房书店

2026.3.14：

1. 更新了街边酒吧的组装说明书
2. 修改了花房书店组装说明书的页码错误

 

看着缩微大佬们的纯手搓、手工上色，对我这种手残党真的太劝退了。为了体验拼装的快乐，建模也会坚持少支撑、少废料、单色即可打印的原则，最大化发挥3D打印的优势，保证各部件能打印直出，让大家打印、拼装都更轻松。

关于本模型，我的理想是把它慢慢做成一整条街，甚至一整座小城镇。未来单栋建筑会做到十几栋、二十几栋，甚至更多（希望我不会鸽！坚持不鸽！一定不能鸽！）。

因为项目会长期更新、不断加新建筑，最终成品长啥样现在还没法完全确定。所以目前的道路布局、电路接线、建筑之间怎么组合，都还只是初步方案，后面会跟着进度一起优化。

说实话，我也是刚接触微缩模型没多久，细节、比例、组合方式、灯光效果这些都还是边做边学边摸索的状态。过程中很可能会大量修改，甚至推翻重来，还请大家多多包涵～

总之，就是想让跟我一样的手残党，也能安安稳稳体验微缩模型的快乐。

最后真的非常感谢大家的支持！祝大家玩得开心，有任何建议、想看的建筑，都欢迎随时留言告诉我，咱们一起把这个小镇慢慢做完～

 

2026.3.9：

1. 更新了花房书店的组装说明书
2. 修改增加了花房书店二楼正面白墙的穿线孔

3. 修改增加了花房书店户外招牌安装架的定位卡槽

    

   1. Updated the assembly instructions for the Greenhouse Bookstore.

   2. Added a threading hole on the front white wall of the second floor of the Greenhouse Bookstore. 

   3. Added a positioning slot for installing the outdoor sign bracket of the Greenhouse Bookstore. 

   …………

    

2026.3.6：所有模型以上传

1. 整体模型分了三个打印配置，分别为两个建筑和路灯马路配件，方便大家将单建筑摘出来利用到其他地方。

   The entire model is divided into three print configurations: two buildings, plus street lamp and road accessories. This makes it easy to extract a single building for use in other projects.

   …………

2. 照明系统大家根据实际情况做或不做，供电我设置了电池盒的卡槽，用2节5号电池供电。卡槽盖切记用PETG！

   You can choose to install the lighting system or not, depending on your needs.I’ve added a slot for a battery case, which uses 2 AA batteries for power.Make sure to use PETG for the slot covers!

   …………

3. 因为没用到AMS，马路暂时未做道路标线，后期会上传道路标线版本的打印配置。

   Since AMS was not used, road markings have not been added to the roads for now.A print configuration with road markings will be uploaded at a later date.

   …………

4. 招牌的文字内容只设置了一个颜色，这里需手动换料一次（0.2mm层高的情况下，切片在第6层添加打印暂停）。如果两个建筑都需打印，可将两个文件的招牌内容放到一起打印。

   The sign text is set in only one color, so you’ll need to change the filament manually once.(With a 0.2mm layer height, add a print pause at layer 6 in your slicer.)

   If you need to print both buildings, you can combine the sign files of both and print them together.

   …………

5. 模型中的玻璃起初我是想用高透的PET装订胶片代替，考虑大家可能没有，所以我将所有的玻璃也做了打印设置。示例模型中玻璃厚度我打印的是0.6mm，如果追求透明度，在0.2mm层高的情况下，大家可以尝试打印两层甚至一层，具体的玻璃打印方法大家可以网上搜一下，三个原则，高温、降速、排线一致。打印文件中的对象都起了名字，一找便知哪些是玻璃。如果两个建筑都需打印，可将两个文件的玻璃对象放到一起打印。

   Here’s the professional, natural English translation you can use directly: --- Originally, I planned to use high-transparency PET binding film for the glass in the model. Since you may not have this material, I’ve also included printable glass parts for all windows. In the sample model, the glass I printed is 0.6mm thick. If you want better transparency, with a 0.2mm layer height, you can try printing just 2 layers or even 1 layer. You can search online for specific glass printing methods. The three key principles are: - High temperature - Slow printing speed - Consistent line pattern All objects in the print file are named, so you can easily find the glass parts. If you need to print both buildings, you can combine the glass parts from both files and print them together.

   …………

6. 马路与模型底座预留了链接卡槽，通过连接件连接固定，方便后期新的模型更新加入。

   The road and the model base are reserved with connecting slots, which are linked and fixed by connectors. This makes it easy to add new models in future updates.

   …………

7. 下边是可动装置的展示，模型的拼装说明书稍等几天哈，一点点的做….，如有其他问题或者建议随时留言！

   Below is a demonstration of the movable mechanism. The assembly instructions for the model will be ready in a few days — I’m working on them bit by bit. If you have any other questions or suggestions, feel free to leave a comment anytime!

为我助力感谢您的助力，我会持续更新这个系列！