labyring puzzle

First of all you will be need ed some items nothing special. 1, item you will be needed hot glue or any glue you prefer. 2. item if you needed ir transparent item like bag, laminating sheet or plastic for covering ball for rolling out.  And 3, item is ball with max diameter is 14mm i was using glass ball which one is 14 and all design is made around that size.

And basicly thats all what you need and ofcourse you can print any ball you want or use stell ball doesnt matter because fun will be.

In this design there is also corner clips or somethinh like that for changing sides from on to another, and yes you will need to glue that too.

Next i know this is not beatiful design but irs just and experiment i just wanted to know if it will work and i just wanted to share that, for maze designe i was usung auto generator for it if you are curios there it is https://www.mazegenerator.net and you can make your own and for 3d i was using fusion 360 becasue its only gave me svg file.

And for designe its easy to assemble nothing special just follow numbers they are on every exit and there will be one side is 1 and second site where wall will be going also is one and next one is 2 and 2 next one is 3 and 3  and i  think its easy to follow,  Overall measuremtns is 250x250x250 big box with 6 difirnet mazes and its NOT MODULAR there will be the same later i will try to make mechanical where you will be using joystick to move but thats somewhat later, GOOD LUCK AND I HOPE YOU LIKE IT