DJI Osmo Pocket 3 Camcorder Style Rig

Camcorder style rig for DJI Pocket 3

I've seen different variations of this online and thought I'd try to make one that would fit my purposes. This is my first 3D design so I'm sure there is plenty of room for improvement. 

I utilized a gopro style quick release for the attachment. Body is in three parts, held together with magnets. I added a few vents at the bottom and a small USB fan to cool the interior. Not super quiet with the rail on top but I either use the mic2 or go without audio and add it in post so it doesn't bother me. 

Back cover can hold a powerbank (I used this one: https://a.co/d/03KIvLUb)

Front will hold an 82mm filter via the 82mm spacer. 

Top rail can hold a handle, dji mic, magsafe phone mount, etc. Anything that fits within a cold shoe. 

I used 2 smallrig handles and angled them in a natural position for myself. If the holes are adjusted, they just need to be 18mm from center to center. 

Photos of the body only were printed in PLA and the photos of the rig with attachments added was printed in PETG, to account for shooting outside in the sun. 

supports are needed. I kept default printing specs but I'm sure there are ways to improve. Future iterations, I would like to do fuzzy skin on the outside.