A lot of time and effort went into this project. If you build it, please Boost it, share your 'Makes' and post some photos! I’d love to see your work and hear your feedback. Thank You!!!
Description
Extreme Performance: Engineered to reach incredible speeds of up to 80km/h with3S 4000 mAh battery
Perfect Size: 50cm length, designed for high-speed stability and agility.
Proven Design: The prototype (the black one in the photos) has already been successfully tested, and I am now building the final, refined version.
Illustrative Goal: The red boat in the cover image is for illustrative purposes to show the final aesthetic I am aiming for. The black one is the proto
*Technical Specifications (Inspired by CozyRC, but heavily modified and improved)
Hull Geometry: Features a revised design with a deeper V-shape for enhanced performance and stability.
Structural Reinforcements: Integrated slots designed for the insertion of carbon fiber reinforcement bars.
Motor Mount: Completely redesigned motor mount with updated geometry.
Servo Mount: Custom-engineered and built from scratch for superior fit.
Canopy Cover: The cover can be securely bolted down using dedicated holes for brass threaded inserts.
Boost MeLove this project? 🚀 Please consider giving it a Boost to support my work and help me fund new high-performance designs! Thank you for the support! 🙌
Hull Assembly Guide 🛠️
Follow these steps to assemble the three hull sections into a single, high-performance unit:
Carbon Rods: Prepare two carbon fiber rods cut to approximately 32cm. These will serve as the boat's internal skeleton.
Gluing the Holes: Apply a generous amount of two-component epoxy glue directly into the rod holes of the printed sections. Ensure the rods will be fully bonded inside.
Stacking: Insert the rods and stack the three hull bodies together, making sure they are perfectly aligned.
Structural Bond: Apply epoxy between the contact surfaces of each section.
Final Seal: Ensure every gap and seam is completely filled with epoxy. This is crucial for a 100% waterproof seal and the structural rigidity needed to handle 80km/h. If the glue overflows or leaks out of the seams, it’s perfectly fine! Any excess epoxy will be sanded down later during the finishing stage.
Let the epoxy cure for at least 24 hours.
Finishing & Waterproofing
Resin Coating: Use a brush to apply a uniform layer of laminating resin over the entire exterior, including the hull and the canopy (lid). This is vital for 100% waterproofing and the structural strength required to handle 80km/h.
Progressive Sanding: Once the resin is fully cured, sand the surface to remove all layer lines and imperfections.
Grits: Start with 240 grit for initial leveling, then gradually work your way up to 800 grit. This creates a perfectly smooth, hydrodynamic finish that minimizes water friction.
🎨 Painting & Clear Coat
Prime & Paint: Once sanded, apply a primer followed by your preferred paint color.
The Final Touch: For a professional result, apply a 1K or 2K transparent clear coat. Using a 2K clear coat is the absolute best choice for a high-end, durable, and glossy finish!
Simone
