Ghostbusters Trap

Do you love the Ghostbusters? Be like them with this full size fan art replica.

The trap doors open to put things inside…maybe your own ghosts. The knobs also rotate adding to the coolness.

This is a kind of lengthy print and does require some hardware and a variety of filament. But who doesn't want their own Ghostbusters trap.

I do recommend printing the main body with support filament as the interface for a nicer finish.

The panel inserts are glued into place.

Print the knob clips in PETG for the flexibility to press into the small panels. Then press on the knobs from the other side. Is easier if done before screwing the panels onto the body.  

HARDWARE

(12) M4 x 3 x 5 heatset inserts

(8) M4 x 10 Socket Head Screws

(4) M4 x 25 Socket Head Screws

(8) M3 x 5 Self Tapping Screws