Brick Star Trek Type 15 Shuttlepod

Boost MeThank you for downloading my model. it takes a huge amount of work to create so if you like this model the please consider giving likes, reviews and boosts as it goes a long way in helping me design new models. Thank you

I designed this recreation of the L.ego Star Trek Type-15 Shuttlepod but at 150% scale.

 

If you open the print profile everything should be set up perfectly in the correct orientation and with supports. Simply hit print.

 

If you are downloading the STL files then everything will need to be scaled to 150% except for the technic pins which need to be at 145% for tolerance purposes. All files are named by colour and quantity needed so it is easy to set up. You may get a non manifold warning, just hit repair and you'll be good to go.

 

GLUE WILL BE NEEDED. USE SUPERGLUE OR SIMILAR. 

 

Please test fit each part before gluing in case any trimming or clean up is required, also ensure it is in the correct place as the glue sets very fast.

 

The instructions are attached in a PDF document. Please download them.

 

If you would like to watch the build series for this design, search for ‘thepanda3dprints’ in instagram or ‘PandaPrints’ on tiktok.

 

https://www.instagram.com/thepanda3dprints

 

https://www.tiktok.com/@pandaprints08

 

On either of my social media accounts i have a Link Tree to my Amazon with all the filaments, glue, applicator bottles etc that will be needed for this build