Modular Cable Management Box - Large

This modular cable management box can be extended with modular mid extension. The print profile includes all sizes of mid extension (part C), which are optional. It takes about 10 hours to print Part A & B with covers.

 

Part A: Front half

Part B: Back half

Part C: Mid Extension (optional)

 

Image below is from the Extra Large version, but assembly method is the same. 

 

 

Print Instruction

• Use 0.6mm nozzle only
• Clean build plate before printing
• Do not change the orientation of the fasteners
• Do not use ABS due to the warping on large size print

 

Assembly Instruction:

 

1. Align Part A, B ( Part C if needed ) 

2. Insert the lock tabs into the slot, then use pliers to squeeze the lock tabs in place (start from the bottom slot and work your way up to the top ones)

3. Secure the lock tabs by pushing the clamp over the lock tabs, make sure two ends are flushed. 

Tips:

• Use this box upside down if you just want hide the cable mess on the floor, no need to print the top covers. 
• Do not lift up this box with stuff inside. Empty the box before transporting it elsewhere. 

See Extra Large Version

Boost Me