Scourge Warrior Cat Model

After a few requests I finally got it. I present, Scourge

Boost MeId appreciate the boosts as I only started designing a few months ago (self taught) and took a lot of time to make Scourge based off of request I received. Any help would be appreciated along with future requests!

READ BEFORE PRINTING!

 

This design took me a bit of trial and error to get right due to all of the overhangs. I perfected the settings on a 3 month old P2S that I just did full maintenence too so PLEASE note that you may end up having to tweak settings. The single color option printed fine but running multi color took a few tries to nail. I tell you this because if you are going to print the multi color version, please be checking in on it regularly. My advice is print a single color first using your cheapest PLA and look at the supports and the bridging. If it looks like you need to adjust, do so before the multi color. The pics you are seeing are done in Petg as proof it can even be done in a more complex material than PLA. File should print well on all printers, I just not this because if your printer is not calibrated as mine is you may need to tweak the support adjustments is all.

 

Im including painted full color, single, and purple collar options where you would then need to hand paint the spikes white.

 

Hope you enjoy! This one took me a bit to nail down!

 

BOOSTS APPRECIATED as this is my 3rd cat in my collection and Im very new to design. THANKS!