Drinkable Cheeseburger - Marathon

The NuCaloric drinkable cheeseburger is quickly becoming a prop I think many people might want to make. I saw this as an opportunity to do another project and get more familiar with 3D modeling.

 

This drinkable cheeseburger was inspired by the few others out there that people have made in one way or another; and through the few pictures of this in-game prop. I used the model from the game as a reference and remade it into a functional prop you can print out for real life.
 

I haven't found out what I'm going to use this for, as it is a container as well, but I'll figure something out.

Important Print Settings:

 

• Wall Generator Arachne or Detect Thin Walls
• Minimum feature size set to 15% (to help make the text more legible)
• Only one wall on top surfaces set to Not applied (without this the flat surface of the top part would be mangled a bit under the text)
• Supports enabled (mostly for the top part)

Filament Used:

It's an older roll I had laying around. GST 3D PLA+ pink. IIIDMAX PLA+ is basically the same brand as far as I know; the fuchsia color from them I imagine would be close enough? I don't know if I really recommend either brand at all really, the quality is not that great. The filament diameter itself is very inconsistent. But at the time of purchase they were really cheap, under $10 a roll, so I went with it. But does not appear to be the case anymore.
 

 

• GST3D PLA+ Pink
• GST3D PLA+ Brown
• elegoo PLA Black
• elegoo PLA White

• elegoo PLA Yellow

   

Boost MeIf you like what I have created here, give me a boost. Helps with getting spare printer parts and filament every now and then. Thanks!