2X3 Chocolate bar Clicker

⚙️ Project Specifications

• Design: 2x3 Grid (6 Keys)
• Filament: Brown PLA (Recommended for that authentic chocolate look!)
• AMS Required? No. This is a single-color friendly print.
• Assembly: Tool-less, snap-fit design.

🛠 What You Need

1. 3D Printed Parts: Base and Chocolate Keycaps.
2. Switches: 6x Linear Blue (Clicky) Mechanical Keyboard Switches.
   • Note: While traditionally "Blue" refers to clicky switches, if you are using Linear switches, any standard 3-pin or 5-pin mechanical switch will fit.

📝 Assembly Instructions

1. Print the Parts: Use Brown PLA for the best result. 
2. Install Switches: Snap your 6 mechanical switches into the base plate.
3. Attach Keycaps: Press the chocolate-shaped keycaps onto the stems of the switches.
4. Secure (Optional): The model is designed for a tight snap-fit (no glue required). However, if you want maximum stability during intense clicking sessions, a small drop of super glue (CA glue) on the joints is recommended.

Happy Printing and Clicking! 🍫✨

Istagram → @frogmin97