cozy coupe mini flexi play car

*** The MADE4ME3D Patreon is now live for commercial sales subscription: https://www.patreon.com/Made4Me3D ***

 

The cozy coupe is making a come back, here he is making a statement and waiting on someone to make him life-size and roll down the street.

 

We put a lot of hours into making this cozy coupe awesome, he brings back a lot of memories for a lot of generations and still smiles like its the first time you met.

 

The Cozy Coupe now has friends! We have started designing an entire collection of Cozy Coupe's to fulfill the need you never knew you had. They are both adorable and totally functional. Check out the entire collection in our design list.

 

***** Update to model:

 

We have made an update to two components on the original crazy coupe.

1. Axle receivers have been sized up to allow easier installation and better rotation of wheels.

2. The roof has been made one piece. This change with not only make installation easier, but will create a part that prints with less scaring.

If any other adjustments are needed, please feel free to send me a message and I'll be happy to review.

Thank you!

**********

 

Boost MeIt is a huge help to the small guys like myself, if you have a boost if you could spend it on models like this. We put a lot of hours into bringing these ideas to life.
You rock, thank you!

 

Here he features the following:

Rolling wheels - connected with axle carriers - will require careful gluing to ensure you don't freeze the axle.

Both doors open - held in the same way as the original cozy coupe, by the front pillars. its darn cute!

Details right down to the license plate, lights, eyes, gas cap, the wheel rims are the same, RED HORN ON THE STEERING WHEEL!!!! even the iconic yellow roof.

 

Assembly:

It will take a small amount of glue to get things put together. the roof, steering wheel and other accessories glue in place.

Yellow pillars, press fit through doors and into body of the car - DO NOT GLUE THIS PART - only glue the yellow pillars to the roof.

for the wheels: there are axle carriers - the support on the bottom of the car will leave small bits where the carriers assemble. Use a reaming tool to get all the support material out. The axle carrier should spin fairly easily, if it doesn't the wheels wont turn nicely. Only apply glue to the small axle, if you glue in the carriers, the wheel will not spin. *********TL;DR: Glue axles to axle carriers, do not glue the axle carrier to the car…***************

 

***********************************************************************

Please take a look at my other models:

https://makerworld.com/en/@ChubbaBubba/upload

***********************************************************************