March 10, 2026
Description
Short Description
A functional 3D-printable pot lid holder inspired by the IKEA VARIERA design.
Multiple size options are included, so you can choose the best fit for your kitchen setup.
Full Description
This is a functional pot lid holder inspired by the IKEA VARIERA organizer.
I added multiple length variations to the project, allowing you to select the most suitable size directly in Bambu Studio.
The model was designed with sacrificial layers in certain areas to improve printability and help achieve cleaner results on functional sections. Because of this, the part may require some care during the very first use.
Please open and flex the part carefully the first time, applying force slowly and evenly. Do not force it aggressively at once, as the sacrificial sections are intended to separate in a controlled way.
This design also includes intentional clearances, so good print accuracy is important for proper function. Before printing, make sure your printer is well calibrated, especially your flow calibration. Incorrect flow settings may cause the part to be too tight, too loose, or not function as intended.
If your machine is properly tuned, this model should provide a clean and practical kitchen organization solution.
Print Profile Notes
Warning / Important Notes
⚠️ First use: Open carefully and apply force gradually
⚠️ Do not force suddenly: The sacrificial sections should separate gently
⚠️ Printer tuning matters: Poor flow calibration can affect fit and function
⚠️ Recommended: Print only after confirming your extrusion and flow settings are well calibrated
License:
Standard Digital File License
burakeser07
