Game of Thrones Inspired Bookmark

Boost MeBoost Me (for free)

🚀 Enjoying this model?

If you print this and love it, please consider giving it a Boost! 🚀 Your support encourages me to create more high-quality, free designs for the community.

 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Project: DragonGOT.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 80.39x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.72mm

    #000000 PLA Sunlu Meta Black  Transmission Distance: 1
    #ff0000 PLA Jayo Red  Transmission Distance: 2.5
    #989898 PLA Jayo Gray  Transmission Distance: 1
    #ffffff PLA+ Sunlu White  Transmission Distance: 2.1
This print uses 4 unique filaments

Swap Instructions:
    Start with Sunlu Meta Black
    At layer #21 (1.04mm) swap to Jayo Red
    At layer #25 (1.2mm) swap to Jayo Gray
    At layer #29 (1.36mm) swap to Sunlu White
    At layer #34 (1.56mm) swap to Jayo Red for the rest.