Universal GPS tracker bicycle mount

Summary

Very simple mount for inexpensive GPS trackers for installation on a bicycle saddle. Consists of only two parts and 4 screws, and can be printed and assembled in just a few minutes.

Full description on GitHub: https://github.com/Smengerl/bicycle_tracker_mount

Printed parts:

• lower_part.stl
• upper_part.stl - print upside down (face on built plate)

Print Settings

• Rafts: No
• Supports: No
• Filament Material: PETG

Assembly

Place the tracker in the lower shell, hold it against the steel rails of the saddle, and then screw the upper part to the underside using the cylinder head screws.