MEAN WELL Power Supply Brackets (HRPG Models)

MEAN WELL Power Supply Mounting Bracket / Feet for the HRPG-300, 450, 600, 1000 Models

For our prototyping stations and PLC test stations we use mainly MEAN WELL power supplies. We made simple mounting brackets for them so we could attach them easier to side panels and portable prototyping stations. After finishing these bracket we thought we would just share them here in case anyone else has a use for them :) Simple to print even simpler to install! Just slide the bracket over the power supplies and secure them with M4 machined screws (the power bricks have dedicated holes on the side.

NOTE: We recommend to NOT use screws longer then 14mm. Any more than that and the screws may start to touch the internals of the power supplies which can cause damage. 

Compatible with all Bambu printers: X series, P series, H series. A1 and A1 mini.

Instructions

• Print per object to ensure better adhesion and results (NOT ACTIVATED BY DEFAULT FOR PRINTER COMPATIBILITY)
• Secure the mounting bracket to the power supply using M4 machined screws

Tips

• Print all parts ‘per object’ for better quality and finish!
• These brackets may fit other models from MEAN WELL! If they do, please let us know :) We shall add them to the listing so that more people can find them!
• These power supplies may heat up depending on their use. Please make sure to use proper heat resistant material to prevent damage.

Print Settings (recommended)

• Print per object to achieve better results and no stringing
• No supports needed