Ruger RXM Case Insert - Parametric

There are 3 parameters to set whether you have a fullsize (1=G17 4.5" barrel or 0=G19 4.0" barrel) RXM, compensator/threaded barrel, and weapon light.

If you choose 0 for all 3, then you have a compact RXM with the 4.0" barrel with no light:

Or maybe you have a G17 length slide with a threaded barrel:

Maybe you have a G17 slide with a standard barrel and a weapon mounted light:

You must change the orientation of the print to -42 degrees on the Y, and then nudge the insert over on the X axis so it fits on your build plate.

Custom supports, which are included in the default print profiles of my previous upload, can also be painted on the bottom of the insert to have better quality and less risk of print failure. Here's where I typically put them: