Ghostface Scream Hueforge

 The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA+ Elegoo White Transmission Distance
    PLA+ Sunlu Red Transmission Distance: 6

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Blue Gray
    At layer #9 (0.8mm) swap to White
    At layer #16 (1.36mm) swap to Red for the rest.